This is a VERY nice, VERY sharp and clean, professionally
made solid high impact urethane casting of the Loki Mask seen in Jim Carey's The
Mask. It is cast on the film-used prop.
The mask is molded inside and out with a seam line that is very easy to clean.
Painting directions: Wash the mask with soap and water to clean the surface. Give the entire mask an undercoat of very dark brown. Then begin to layer in the surface features in vertical paint strokes, using green, dark green, tan, brown, medium green etc... Finish your mask in a matte clear-coat sealer and you're ready to display!
This is a LOKI mask that is cast on a hero
mask used during filming. It is a fantastic casting made of solid high impact
urethane resin. It is fully detailed inside and out and easy to clean and trim.
See the TUTORIALS section for instructions on using tools to do the trimming for
you.
Painting instructions: After you trim the flashing off and sand the seemliness,
give the mask a good primer coat. Once dry, you can base coat the entire mask in
flat dark brown. I prefer using acrylics to detail as they are easy to apply and
wash off. Start by generating a palette of paint that includes white, black, a
few shades of brown and a few shades of green. Start applying the shades of
green following the wood grain. Don't use a uniform shade of green and brown -
use the white and black to create a multitude of shades. Be sure to paint all
the way across the inside of the mask as well. Go back in with lighter and
darker shades of brown and green until you have a random coloration on the
grain. Don't be afraid to use very light shades of green. The film-used mask had
some very light highlights. When finished, give your paintjob a coat of matt
clear coat to protect against scratches and water. Have fun!!!!!!!!!!
DUNE KNIFE
This a CRYSKNIFE from the original DUNE film. It is cast in solid high impact
urethane resin and painted a faux-bone color. The kit is very easy to trim and
clean.
Email for more information.
SMMMOOOOOOOKIIIIIIINNNNN!
This is a 2nd generation life casting of Jim
Carey with his MASK facial prosthetics applied. Since the casting is sourced so
close to the studio molds, there has been absolutely no shrinkage, this is a
LARGE piece!! Cast with a urethane shell and backfilled with rigid urethane
foam.
Bubo is about a half scale replica from CLASH
OF THE TITANS. He is 5 parts: The head/body, 2 feet, and 2 talons.
He can be gold plated and masked for chrome painting to achieve the display you
see here.
The raw kit (requires trimming, assembly) is $75 plus shipping.
CONAN ATLANTEAN SWORD.
This weapon is a full-scale reproduction of the sword Arnold used in the CONAN
films. It measures a WHOPPING 39 INCHES and is cast with an aluminum core for
blade strength. The hilt and blade are cast high impact resin so this is ideal
for a wall display and a swing around item, but not good for actually hitting
anything with any kind of force as the resin will fracture.
These are MUMMY-ish prop scarabs. They are simple one
piece resin castings that are easy to trim and paint. They can be used as
paperweights, pendants, and you can even glue a pin to the back and wear it as a
broach.
$10 for a pair $15 for 4 Shipping $6 in the U.S.
These MATRIX-ish brain plugs are perfect for you bald headed fans out there. Just put some adhesive to the rear of one of these and wear it out and about as a brain plug. They are simple one piece high impact (won't break) plastic castings that are easy to trim and paint silver. $10 for a pair $15 for 4. Shipping $6 in the U.S.
These are STARGATE replicators. They are one sided and area available for $14 for a dozen. I can also make a bucketload to make your own replicator spider. Email for details.
