MARTY BOARD:
Made from the same dimensions as the film-used prop, this is Marty's Mattel
HOVER BOARD rendered in full scale and detailed down to the last notch. The deck
is made from solid composite board (same material used to make real skateboards)
with the wide 80s style subdued kickboard angle and layered top and bottom with
professionally laser cut decaling. The bottom of the board is detailed
authentically with resin cast and vacuuform components, all completely assembled
and attached securely with metal pins.
13 LBS.
There's even one for your favorite Bully!
PIT-BULL HOVER BOARD:
This is a life-size recreation of the PIT-BULL hover board!! The
deck consists of a computer controlled machined MDF (fiberboard) layered and
detailed with resin castings. Each piece was meticulously hand crafted and
molded. The detail is astonishing on this replica, right down to the thruster
assemblies and hand-drawn art.
The kit includes:
The wood deck, the decal, a footpad, hook-on clamps (6 all together), hook-on
clamp supporting panel (the W-shaped panel), a rear end detail panel (the one
with the ribs), 2 rockets (6 parts total), 2 side clamps, 2 hover pad bases, 2
hover pads, center brick, set of four clamps, half-moon detail casting, rocket
brace (the long flat perforated panel), rocket brace brick.
You supply the 2" webbing required to detail the footpad and hook-on areas.
Paints and tools not included.
ALSO AVAILABLE
The Rising Sun, No-Tech and Odd-man-out hover board kits include the following parts: Laser routed MDF deck, set of decals for the top and bottom, 2 side clamps, foot pad disk, 2 hover disks, 4 clamps, and the center battery brick.
And after all this hover boarding, you will surely want a nice
cool refreshing PEPSI perfect!
This is a replica of the PEPSI PERFECT and SLICE bottles seen in BACK TO THE FUTURE PART 2. When they are in the cafe you can see these bottles sitting on the counters. This replica was turned on a lathe, molded and cast in high impact urethane resin. It measures 9 inches from top to bottom and is very accurate. The decals and flip top are not yet completed but I wanted to showcase this marvelous sculpture. Email for more details.
